Flow Indicator
MODEL : FI 593
Display : 16 Character X 2 Line LCD Display
Resolution: 1/ 0.1/ 0.01(any one User Selectable)
Relay Output: 2 Relay (5A rated)
- Introduction
- Specifications
- Key Features
Product Details
FI 593 Flow Indicator & Totalizers are extremely versatile indicators that can be used with a variety of Analog output flow sensors. These indicators offer extreme reliability and low cost for flow measurement.
FI 593 Flow Indicator & Totalizers can be used with Current (or) Voltage output sensors. Micro controller based electronics ensures accurate readings for both rate of flow indication and total flow indication.A number of programmable features including Inline calibration are standard.
All the parameters are saved in a non volatile EEPROM memory which doesn't needs any external battery.
There is a advanced power fail feature by which even if there is any power failure the Total Flow reading is automatically saved to memory and resumes with the same value after Power On.Programmable Flow Rate High & Low Range Selection for Various Flow Sensors & Transmitters. Selectable Units & Resolution. Selectable Linear / Square root Conversion for Analog Input (4–20mA).
| Model | FI 593 |
|---|---|
| Display | 16 Character X 2 Line LCD Display |
| Input Type | 4–20mA / 0–10V / 0–75mV (User Selectable) |
| Accuracy at 25°C | ± 0.1% of FS |
| Resolution | 1 / 0.1 / 0.01 (any One User Selectable) |
| Display Modes | Flow Rate (FR) & Total Flow (TF) or Batch Total (BT) |
| Display Range | 0–9999 (4 Digits) for FR, 0–99999999 (8 Digits) for TF |
| Voltage Drop | 1 V Maximum (Applicable only for current input models) |
| Input Impedance | 18K Ohms (Applicable only for voltage input models) |
| Conversion Modes | Linear, Square Root (User Selectable) |
| Units | m³, Litre, Gallons, Kg (any One User Selectable) |
| Total Flow Reset | Provided with Password Protection & Enable / Disable options |
| Batch Total (BT) Start | Auto with Delay / Manual in Front Key (any one user selectable) |
| Re-transmission Output (optional) | 4–20 mA / 0–10 V (any one Factory Presettable) |
| Relay Output (optional) | 2 Relay (5A rated) with individual Relay assignment setting |
| Communication Interface (optional) | RS 485 (2 wire) or RS 232 (any one Factory Presettable) |
| PC Software (optional) | Monitoring, Data logging, Report & Graph |
| Slave ID | 1 to 32 (user selectable) (for RS 232 set Slave ID as 1) |
| Baud Rate (bps) | 9600, 19200 (user selectable) |
| Flow Rate Time Base | Seconds, Minutes, Hours (Selectable) |
| Sensor Supply | 24 V DC / 100mA Max. |
| Power Supply | 90 to 270 V AC, 50/60Hz |
| Operating Environment | 0 to 50 Deg C / 20 to 95% RH Non Condensing |
| Mounting | Panel Mounting |
| Dimension | 96 × 96 × 85 mm |
Note: Due to continuous product improvements, Published specifications may change with out notice.
16 Characters X2 line LCD display- Rate of Flow, Total Flow
- ±0.1% of full scale Accuracy
- Micro controller signal processing
- Programmable Flow Rate Ranges
- Selectable Units
- Selectable Resolutions
- User Front End Calibration
- Compact size
- Voltage (or) Current Analog Outputs
