Low & Liquid Temperature Bath
Model : TCAL 1501 / - 40
Temperature Range:– 40 to 50°C
Resolution 0.1°C
Stability ± 0.05°C
Multi hole provision for different type of sensors, sensor with Indicators & Thermometer calibrations.
- Introduction
- Specifications
- Key Features
- Accessories
Product Details
SANSEL series TCAL 1501/- 40 is a micro controller based precision “LOW TEMPERATURE LIQUID BATH” generates true reference temperature with high resolution and stability. The temperature controller of the bath uses a auto tune FUZZY PID controller algorithm. This fast response closing follows the cooling curve of an actual thermal system.
Place the thermometers and thermocouple & RTDs to be calibrated in the bath. Set the temperature from the 3.5 inch true TFT display with touch screen . Both liquid and set temperature can be read. When stabilization occurs, simply read the temperature and re-calibrate the thermometer, sensor etc., or comparison with master RTDs reading.
| Model | TCAL 1501/ - 40 |
|---|---|
| Display | 3.5 inch True TFT display with touch screen |
| Temperature Range | -40 to 50°C |
| Resolution | 0.01°C |
| Heating & Cooling medium | ETHYLENE GLYCOL HOCH2CH2OH purity 99% (3litres) + Pure distilled water (1.5 litres ) for range from - 40 to 50 °C |
| Liquid Capacity | 5 Liters (approx.) |
| Stability | ±0.05 °C |
| Uniformity | ±0.2°C |
| Heating time | 30 mins |
| Cooling time | 60 mins (amb. (25°C to - 40°C ) @25°C |
| Stabilization time | 15 minutes |
| Multi hole PP top cover | Provided for test Thermometer or sensor holding |
| Power supply | 230V AC 50/60Hz |
| Power consumption | 1300 VA |
| Calibration chamber size | 90 W x 120 H x 175 D mm |
| Overall Dimension | 530 x 340 x 670 (L x W x H) (+155mm circulation motor) (Approx.) |
| Instrument Weight | 52 kg (without liquid) |
Note: Due to continuous product improvements, Published specifications may change with out notice
4.3 inch True TFT display with touch screen- Range from – 80 to - 40°C
- Micro controller based Linearize
- Stable to ± 0.03°C
- Uniformity ± 0.2°C
- High Accuracy
- Multi hole provision for different type of sensors, Thermometer calibration.
- NABL Calibration Certificate
Standard Accessories
- 1.Basic Instrument
- 2.Top multi hole PP chamber cover
- 3.Top SS Dummy cover
- 4.Spare Fuses
- 5.Instruction Manual
- 6.Test Certificate
- 7.Mains card
Optional Accessories
- 1. Master SSPRT sensor
- 2.ISO/IEC 17025 Accredited calibration certificate
