Industrial Conductivity / TDS Sensor
MODEL : CSI - 0.01
Pressure :0 to 7 bar
Range : 0.05 – 20 μS
Resolution : 0.01
- Introduction
- Specifications
- Key Features
Product Details
This series conductivity cell are designed for continuous use in water temperature up to 80°C. The cell may be installed directly into the process of stream (or) optional bypass chamber.
Cell with k - 0.01 covers range from 0.05 to 20µs. They are extremely suitable for pure and high purity water application. The electrode material for these cell is stainless steel 1.4571.
The cell measures the sample passing through inside of cell chamber to eliminate error caused by external metallic surface. This makes them ideal for installation of metallic flow lines.
| Model | CSI - 0.01 |
|---|---|
| Pressure | 0 to 7 bar |
| Range | 0.05 to 20µS |
| Resolution | 0.01 |
| Operating Temperature | 0 to 80°C |
| Response Time | 90% of value in <5 sec. |
| Body | Stainless steel outer cell, Stainless steel inner cell |
| Connector | Pin type |
| Process Connection | Front: ¾” BSP male |
| Cable | Standard: 5 meter (Optional: 10 meter) |
| Temperature Sensor | Pt100 RTD sensor (optional) |
Note: Due to continuous product improvements, Published specifications may change without notice.
Pure and highly purified water.- Boiler feed water.
- Chip manufacturing.
- High temperature application.
- Pharmaceutical, etc.,.
Available Models
